Home » Metal Ceilings » Metal cell ceilings » BASE 4 H30 SC spring open cell metal ceiling system
Base 4 H30 SC is a spring open cell metal ceiling system made up of 600x600 mm or 600x1200 mm panels, in 4/10 aluminium, hooked on TSC carriers, through specific wire steel springs. Modules therefore can be easy installed and removed for frequent plenum inspection and plant maintenances.

Base 4 H30 SC spring open cell metal ceiling system is a smart and original solution to create an uniform and plain false ceiling in which the main elements are mixed up with the carriers without any junction. The integration of the main elements with the carriers ensures a sleek and modern aesthetic, making Base 4 H30 SC an ideal choice for contemporary architectural designs. This metal ceiling system is made of special closed blades with a distinctive delta cross-section, at the ends of which there are specific punches that allow an easy insertion of the hooking springs.

The modules can, therefore, be removed or remain open for plenum inspection or plant maintenance activities. In fact, the panels, available in double sizes of 600x600 mm and 600x1200 mm, are installed by simple hooking to special TSC carriers with grooves for blade centring. To ensure proper alignment of the carriers, they will be used also as spacers to be installed orthogonally at a pitch of 2400 mm. They therefore have a dual function of hooking and alignment. The modules can swing only on 600mm side and can be supplied in 6 six different square meshes and 24 rectangular ones with an open area range from 81 to 95%. Moreover panels can be supplied pre-assembled or to be assembled at site.
Base 4 H30 SC spring open cell metal ceiling system requires as wall angle a 18x33x25mm "C" shaped profile, made in 5/10 aluminium, with the same finishing as the grid metal cells. Regarding the hangers, this spring open cell ceiling requires threaded bars to be suspended; the type and incidence of hangers must be set according to the load per m2, project requirements and anti-seismic kits - if provided.

This spring open cell metal ceiling system with continuous effect and tilting hooking modules is available with both standardised meshes and custom-made cells on request.
The Base 4 H30 SC spring open cell system offers versatility in terms of design options.
The system is always available in standard white or silver, but on request it can be realized in RAL/NCS colours, or in wood finishing providing further flexibility in colour choices and allowing for a more unique and personalised aesthetic.

Base 4 H30 SC spring open cell system stand out for the continuous
 and homogeneous effect combined with a spring hooking system
which make the ceiling easy to install, safe and well-made.

Swinging open cell metal ceiling
Spring system

Aluminium 4/10

Panels: 600x600 | 600x1200 mm
Elements: 4xh30 mm
TCS carrier and spacer


White | silver pre-painted aluminium
RAL/NCS post painting
Wood effects.

40x40 | 50x50 | 60x60 
100x100 | 120x120 | 150x150

30x60 | 30x100 | 30x120 | 30x150
40x100 | 40x120 | 40x150
50x100 | 50x120 | 50x150
60x40 | 60x100 | 60x120 | 60x150
100x40 | 100x50 | 100x60 | 100x150
120x40 | 120x50 | 120x60
150x40 | 150x50 | 150x60

80x40 | 80x50 | 80x120 | 80x150
Olny for 600x1200mm panels

Product ​Specifcations

Get the